Fehlermeldung in BootApp bei CalcFlashCheck_A

Hallo Rolf,
ich versuche gerade die Funktion CalcFlashCheck_A in einer BootApp zu verwenden.
Der Compiler meldet dann das Fehlen von "Boot_Init" und einiger weiterer Flashloader Funktionen.
Eigentlich möchte ich nur die Checksumme der App überprüfen. Ist CalcFlashCheck_A in einer BootApp überhaupt möglich?

Gruß Joachim

Anhänge an diesem Beitrag

// ******************************************************************** // This application runs completely in the boot section of the AVR. // Some library functions and drivers are used and also interrupts // are running. If the FlashDownloader is started then also here // the standard interrupt driven UART/SerPort is used for communication. // Please note that the constant "BootCheckF" is placed to a fixed // address, but is outside of the boot area. A valid main application // residing in the "normal" code area $0000 and up must provide this // constant in order do an immediate jump to $0000 into the standard // application area. // The Main Application must be build and compiled separately and can // be downloaded with this Application/Bootloader // ******************************************************************** program BootApp; {$NOSHADOW} { $WG} {global Warnings off} Device = mega128, VCC=5; {$BootApplication $0F000} // 8kByte Boot size Define_Fuses Override_Fuses; NoteBook = E; COMport = USB2; Supply = 5, 100; LockBits0 = [BOOTLOCK11]; FuseBits0 = []; FuseBits1 = [BOOTRST, BOOTSZ0, BOOTSZ1, CKOPT, JTAGEN, OCDEN]; // 8kB Boot FuseBits2 = []; ProgMode = JTAG; ProgFuses = true; ProgLock = true; ProgFlash = true; ProgEEprom = true; // AddApp = 'c:\PROJEKTE\Pascal_sc\AVR\EvaBoard\AVR EvaBoardI'; // Info for programmer, joining hexfiles, using this project name Import SysTick, FlashWrite, SerPort, BeepPort, SysLEDblink; From System Import FlashCheck_A; Define ProcClock = 16000000; {Hertz} SysTick = 10; {msec} StackSize = $0030, iData; FrameSize = $0064, iData; SerPort = 19200, Stop2; {Baud, StopBits\|Parity} RxBuffer = 8, iData; TxBuffer = 8, iData; SysLedBlink = 10; {SysTicks} SysLedBlink0 = PortA, 0, high; BeepPort = PortG, 4; Implementation
Dateiname:	BootApp.pas
Dateigröße:	4.49 KB
Titel:	BootApp
Heruntergeladen:	211

Fehlermeldung in BootApp bei CalcFlashCheck_A

Fehlermeldung in BootApp bei CalcFlashCheck_A

Anhänge an diesem Beitrag

Re: Fehlermeldung in BootApp bei CalcFlashCheck_A

Re: Fehlermeldung in BootApp bei CalcFlashCheck_A

Registrierte in diesem Thema